Quick Shipment for Full Safety Sensor Replacement

Home / All / Safety Mats Replacement / ASK-Series Safety Mat Replacement /

ASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat Replacement

ASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat Replacement

ASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat Replacement
ASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat ReplacementASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat ReplacementASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat ReplacementASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat ReplacementASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat Replacement
CategoriesASK-Series Safety Mat Replacement
BrandDADISICK
ModelASK-Series | ASK-1T4.4-NP 1x1
Series:ASK-Series
Activation force:Nominally 150 N (Round body 80 mm)
Maximum load:2000 N over Ø 80 mm
Response time:Please refer to the following
Material:Black polyurethane
Degree of protection:IP65
Certifications:cULus, TÜV
Update TimeOct 5,2024
Detail Information
ASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat Replacement Parameter
Brand
From network
DADISICK
Models
ASK-1T4.4-NP 1x1
DT15-100X100
Dimensions
1000 mm × 1000 mm × 14 mm
1000 mm × 1000 mm × 15 mm
Activation force
Nominally 150 N (Round body 80 mm)
20 kg min. (20 kgf ≈ 196.1 N)
Maximum load
2000 N over Ø 80 mm
400 N/cm²
Response time
Including Sentry < 20 ms, Including Pluto (single Pluto) < 30 ms
Including Pluto incl. Pluto bus: 
Normal condition: < 40 ms
At fault condition: < 70 ms
18 ms
Material
Black polyurethane
NBR
Degree of protection
  IP65
IP65 / IP67
Certifications
cULus, TÜV
TÜV
Connection
M8
Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life
> 1,000,000 times
> 3,000,000 times
Ambient operating temperature
-10℃ to 55℃
-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.
Product model display instructions
The product models displayed on this page are only used to describe and compare the characteristics, specifications, and performance of different products. These models do not represent recommendations or associations for any specific brand or company. When users choose products, please understand and compare the detailed information of each brand's products on your own.
Product recommendations
DADISICK Pressure Sensitive Safety Mats
DT15 series safety mats
Models:
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100

Tips:
For non-standard dimensions of safety mats, the side length should be < 3000 mm, and the area should ≤ 1.5 m².

FAQ
How should pressure sensitive safety mats be maintained and tested?
A: Regularly clean the surface of the mat to prevent dust and debris buildup. Test the mat's functionality periodically according to the manufacturer's recommendations, ensuring it operates correctly. Testing methods usually involve applying known pressure and verifying the control system's response.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
Satety Mat Electrical Wiring Diagrams
K-Type Dual Channel 4-Wire Mat Connected Relay Ter-A Safety Input With Manual Reset
The control principle diagram of safety mat safety protection
R-Type 2-Wire Mat Connected Relay Ter-A Safety Input With Manual Reset
Sensing Output - R/K Series Combination Of Safety Mats
Sensing Output - K-K Series Combination Of Safety Mats
Sensing Output - K/K Series Combination Of Safety Mats
Sensing Output - R-K Series Combination Of Safety Mats
Sensing Output - K/K Series Combination Of Safety Mats
DT15 Series Safety Mat Data Sheet
Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Industrial Automation Security Solutions